What is causing your safety switch to trip?

Typically, it indicates an electrical fault or current leakage in the system. It may be caused by a faulty appliance, damaged wiring, moisture or if a specific circuit is damaged.

A safety switch is a switch that stops current flowing when it detects a fault which could cause an electric shock hazard. If it continues to trip an electrician Maroubra can determine the cause of the problem instead of repeatedly resetting the switch.

What is causing a safety switch to keep tripping?

Some common reasons are: Moisture, electrical equipment developing a fault, faulty power cords, damaged power points, and faulty appliances.

Sometimes the problem only occurs when a particular appliance is switched on. Sometimes, the problem could be with the wiring or the other components of the electrical system.

Will it Trip Due to a Faulty Appliance?

Yes. When an appliance has an electrical fault, it can cause a safety switch to trip, like when a washing machine, dishwasher, dryer, air conditioner or outdoor equipment has a fault.

If the switch trips when you operate a specific appliance, discontinue use of the appliance and have the issue resolved, don't keep resetting the switch.

Can Water Cause a Safety Switch to Trip?

Electrical problems can be caused by moisture, such as around bathrooms, kitchens and garden equipment, as well as in outdoor power points.

Avoid touching any part of the equipment if it has come into contact with water, and seek professional help. It is recommended that work with electricity in NSW is completed by a licensed electrician.

The question is, “What Should You Do When It Trips?”

If the safety switch trips, if it is safe, disconnect an appliance and look for visible damage.

If the switch trips again, do not repeatedly re-set it and if you don't know what caused the trip, stop re-setting it. CGF Electrical can conduct a thorough inspection of the problem and notify the licensed electrician to take care of the repair.

When is it Time to Call an Electrician?

Otherwise, professional assistance is needed when you observe:

•                    Repeated tripping

·         Often a change in smell or buzzing that is caused by burning.

•                    Sparking

·         Worn cords or power point plugs

·         Safety rules all related to electrical equipment:

•                    Problems with the switchboard

•                    An electric shock

When searching for an electrician Marouba, opt for a licensed electrician who can describe what is causing the problem and what is needed to fix it.

What Can an Electrician Do?

A qualified electrician can check the switch board, determine the faulty circuit, and test equipment, wiring and fittings. When they have identified the fault, they can be able to describe what needs to be done to repair or replace the fault.

This is safer and more reliable than replacing electrical components without determining cause.

What Can You Do to Avoid Multiple Trips?

Replace damaged cords and faulty appliances, keep electrical equipment away from water and don't ignore recurring electrical faults. Professional checks can be performed regularly, too, and can help find issues before they become more serious.

What is the final thought?

A safety switch that continues to trip is normally a red flag for trouble. Instead of going through the troubles of resetting, it again, determine what's wrong and ask a licensed electrician to come in and diagnose the problem.